Looks pretty slick. You should run the Q-loader directly into the breach on this.

i thought about this for a while...the problem is the qloader will be forward more like 2.5 inches...and to be to "scale" with a real Bizon, i'd need a longer barrel and the whole setup would be longer...with my HH barrel its the perfect length and i want to get this as short as possible

and i know it will work with qloaders 98 mod kit....direct-breach-loading is iffy....once again i'm going with the KISS thought

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

That's true. They way you have the hose routes isn't too bad anyway.

ya, it looks clean

another reason i didn't want to go direct feed (forgot to mention) was this setup is easier for cleaning if a ball breaks as well if the qloader system was to go down i could still slap a hopper on..

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

well, my break from after the completion of the SCARSig is over, starting next week...i'm going full retard on the wendigo and my bullpup

today, i did a little order through ebairsoft










i'm redoing my qloader bracket

i'm making the new part to be a qloader bracket/trigger guard all in one type part

as well i'm milling the recievers most so the qloader socket sits 1/2inch higher, keeping more to my scale issue

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

the next step is to mod that grip to fit my 98 with RT....then i can make the trigger guard.

can't start the top receiver astectics untill i make the rear sight...can't finish the front sight till the rear is done can't make the shroud until the qloader is mounted...speaking of which tomorrow i'll be placing an order with qloader for 2x CMS 98 kits

i can do the cocking mod anytime now...


too bad i can't get this imported to Canada:

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

Tell me about it. Canadian import regulations are a female dog :P

__________________
Just started a random blog: http://roasuburbanite.wordpress.com/
Not that I expect you to read it...
"Get a dremel, and go to town....until it fits..." - Wingman

i think that canada post truck driver guy is gonna get to know me well, he brought me the eb order:



the hacksaw is gonna fly tonight

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

I wondered if you'd do a grip mod, apparently you are. You could try and fab the receiver, though it wouldn't be the same. There's gotta be some fairly easy way to import that thing.
This whole border stuff is annoying, I can't even go to toronto now without a passport or "enhanced" license.

ya...take a 50/50 chance customs opens the box...

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL