Ok so I am going to get a 98 that has rt and lpk. It has the large size air lines on it already
I want to get a cylone kit for it but my ? is would it be better to have the larger or smaller air line with the rt and cyclone with lpk

I have the rt and cyclone and I run the bigger lines i dont know how the rt, cyclone, and lpk will work together but in my experience with the two the bigger lines were better.

You will gain the ability to have the cyclone feed match your rate of fire with the larger lines, that factored along with your cyclone mods. You will need an orifice piece that Tippmann gives to restrict flow to the cyclone though.

__________________

I on another post in the cyclone section was told that if you adjust the banjos to make the hole not open completely or restricting the flow helps and that also seemed to work. The only thing is if the banjo isnt completly threaded in use teflon tape to create the seal.

Look in thread nane "Cyclone Help" and Watcher was the one who posted the banjo adjustment idea

I have got the 98 since this post was posted and used 1/8 lines to r/t and cyclone and it seems to be working great that way.

__________________


98 Custom: RT trigger, LPK w/Tippmann Secondary Reg, Rocket Cock, 16" Night Stik, Colapsable Stock, Double Trigger
Cyclone: X7 LP hopper, virtue crown, 1/8” lines, Palmers QEV, Lapco QEPH, TechT soft paddles, TechT ratchet, TechT lightning rod, and War Gear clear housing

I have heard of this i wounder if it would make a differance. But would I still need the QEV.

__________________


98 Custom: RT trigger, LPK w/Tippmann Secondary Reg, Rocket Cock, 16" Night Stik, Colapsable Stock, Double Trigger
Cyclone: X7 LP hopper, virtue crown, 1/8” lines, Palmers QEV, Lapco QEPH, TechT soft paddles, TechT ratchet, TechT lightning rod, and War Gear clear housing