Ok, here is the problem... i just got a really nice stock but cant get the ACT spring in, tried it without and well, it was working but not as good.... Is there a way to make the ACT bolt work with one spring my guess would have been yes with a non act dive spring but hell does i know, i better ask you guys first before buying somnethin stupid in impulse :P

__________________
French Canadian Division

Why not just drill out the stock to take the ACT spring?

__________________
Model98.org, Where Tippmanns Have No Limits

GONE TIL NOV 2013

well, its empty plastic, no? If its full, i guess i could drill it easy... but if its hollow, all i would do is a hole...

__________________
French Canadian Division

Proteam Products sells the same collapsible stocks with the option of the A.C.T. feature or without.

<B>Tippmann Model 98 Upgrades

I say drill it. I'll give you the measurement for the hole if you want it.

ya you have to drill it if your stock is not ACT compatable
or get one that is compatable!

__________________

Bah, compatibility is just a hole away... what are the dimensions? i guess i could just mesure it but hey, precision is important here

__________________
French Canadian Division

Arite, here you go.
3/16 bit
14mm deep
1cm on center from spring hole.
And dont forget to tap the hole.

why the hole need to be tapped?

__________________
French Canadian Division

act all the way, no ball break