Hahahaha well I've never used midnight before because its loose in my barrel... I didn't know it was so good haha

Alright well I'll give it a try next time. Would you happen to know the bore size?

Personally, I wouldn't give up your CP for a J&J. Custom Products are the best single bore for the money. Much over 12 to 14 inches is a waste. It doesn't help in accuracy. I have shot many different barrels, barrel lengths on many different markers and I can tell you. You do not see any difference from a 12 to 16.

__________________

I generally use my .686 bore on my Hammerhead kit with the Midnight. .688 of my teammates J&J kit works pretty good to.

__________________

i don't know who told you this but consider the following:
a 1" barrel and paint leaving it at 300fps (which is the standard in paintball) and a 20" barrel and paint leaving it at 300fps. If the paint is the same size it will fly exactly the same distance. You see, the key point here is that since they both leave the barrel with the same velocity they will fly the same distance. HOWEVER you might need more air to have the same muzzlevelocity (which is why you should always chrono your marker whenyou switch your barrel).

accuracy consists of many different factors out of which I would say choosing between 12-18" is the least of your concerns.

on my upp'd ion rocking an iFit and a freak I noticed no change in accuracy changing only the tip from 11" (AA front) to a 17" (AA front). However I did notice a small change in fps. Changing the inserts of the iFit and Freak, however, had an impact on accuracy and I managed to have a change of roughly 25fps depending on the inserts.

So you sir are saying that a 1" barrel will shoot the same distance as a12" barrel?

WE MUST PUT THIS TO A TEST!

someone test this please lol

__________________

an 05 science fair... meh

__________________

12-14" goodpaint good luck your bound to have some wingers