what all internals from 98c will fit a PS?

__________________
alpha black tactical,egrip

yea, you just need a longer air line to reach to the grip. Other than that they are the same

__________________
Image removed as it was too tall.

i think the triggers are different. PS is longer i think

__________________
alpha black tactical,egrip

could be...you could make one work im sure. The Internals are the same tho

__________________
Image removed as it was too tall.

barrels same threads?

__________________
alpha black tactical,egrip

yup, barrels threads same, interals the same, stocks the same...only thing is you cant put a double trigger on a ps unless you cut the trigger guard off.

__________________
Image removed as it was too tall.

Also if you use the Etrigger, you will need a longer armiture pin for it as the PS grip is longer

__________________

Ahh yes...just remembered that as well ^^^^^^^^^^what he said!

__________________
Image removed as it was too tall.

I've converted mine...
You defiantly need an Alpha Black/Salvo trigger. It is taller. If you are using the E-trigger, also need a longer trip pin. Be aware, the E-trigger for a 98 acts glitchy when put into an Alpha or Salvo frame. In mine,was shorting against the body frame. You would be better off using an RT for it or getting the Actual E-trigger board meant for it. Also check the air hose length, but should be O.K...
If you going to switch over the RT for a 98, need a longer internal hose(has to be about 1 1/2 inches).


Mine went from this....


To this....




the Barrels are the same threading. And most stocks are interchangeable. I had to cut a notch in the Salvo frame for the sliding stock to work properly, otherwise no problems...

Everything is the same as the AB except many of the hoses due to a longer body.