i cant wait to see it :P And blue is now prohibited :P

__________________
French Canadian Division

lol, blue isn't my thing..., but i can't wait to start the project im excited....

__________________

Ok, changing of program, this baby will be my GF toy :P i need to stick the 9oz co2 bottle directly under the gun, where the braided hose connect... anyone done it? and how? i mean i would need a female thingie to screw it in and then adapt it with the end that goes on the powertube.. Yeah, my english is bad, i know, but im pretty sure you understand.. like the vertical kit that went in the handle but now would go directly in front of the trigger..

__________________
French Canadian Division

try going to your local pro shop and see if they have a vertical adapter for a spyder, that might work if you could figure out how to make it work. good luck

__________________
I'm a Christian baller. Put this in your sig. if you are too.
If you think all those whiners about the weight of a Tippmann should go lift some weights, copy this into your sig.

the PS har some special fitting so you will need to buy the vertical adapter for the PS (not the one for model/custom 98)

i need to know if there is any adapter or fitting for the PS valve.. Checked Plmer site, got some pieces that im not even sure that would be useable.. checked on tippmann forum, nada so far and searched Google and found the 98og old thread that says i could put the old valve in and it woul be good.. anyone got a old school valve for sale ( i kn ow its not BST but i cant write in it..)

__________________
French Canadian Division

check tippmannparts. but there IS a "vertical adapter" for de PS. basically its an ASA that you screw in instead of the line.

still searching for that... i saw picture but i cant seem to find that part!

and im willing to trade a PS valve and asa line and mounting for a old school screwing valve..


EDIT

found it on some site for 55-60 bucks not shipped..... ugh... this hurts! i dont want the expansion chamber, i want the little piece that hold it.. will get me a nice 13cu HPA tank to run that baby anyway :P

__________________
French Canadian Division

i know what you mean. had the same problem with my RK-62 mod. ended up running the line inside the mag and getting a 90degree fitting from an X7. then running a "normal" steelbraided line from there to the ASA (basically the airline is doing a U-turn inside the mag)

Hey! found a friend who have the expansion chamber! we will see if it fit on a bottle, just need the shipping.. anyone got one for the PS and wanna share if it fit? or do we keep the mystery?

__________________
French Canadian Division