The response trigger is a bit of a misnomer. The main part of the upgrade is an air driven piston that pushes on the trigger as the marker cycles. Depending on how it is tuned you can keep constant pressure on the trigger and get a multiple round burst. It could be a quick short burst or it could be more of a full auto burst.

__________________

Go with a r/tr, you should be able to find a used one for cheap (just make sure you get thick hoses with it) and the 98 r/t system is way beast compared to the a-5's... With a little practice, you can rip 12-15 bps full auto, and bursts.

__________________

you can sorten the pull of your trigger which helps with walking....this envolves drilling and tapping a hole for a small setscrew.....i dont endorse this because you are no longer able to use the stock safety (lots of info on this over on model98.org or copy the way they are on a TechT Fang trigger)...you can also make your own verson on the TechT hair pin trigger kit to shorten the distinst the sear needs to move before it trips the hammer...

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

WAS (tippmann) is capped at 15bps....pre tippmann WAS boards im not sure of

APE is capped at 30bps

my SD tboard is capped at 99

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

i would be most interested in that.. will go looking on model98

Got any particular thread i should be looking at?

__________________
French Canadian Division

sorry...the site just came back up and im having troubles with the search feature....

just look up anything on trigger pre-travel (and post too) and hair pins

__________________
Metal Church, XO
Hex's Feedback, Hex Wants, La Pig, SD UTB egrip , La Piglet, Wendigo, B98, Hex's TPX, The SCARSig, FN FAL

You could pin the sear so it fires full auto, and use the RT to slow the rate of fire to a more controlable ROF. There are write ups about it on the A5og site. I've seen it on a X7, and he had it going about 25bps with a stock cyclone. You can pick up RT setups for $60 or so.

__________________

SAS-Speed-Wisconsin

Current Markers:

UMP-A5, ICP B5, X7Phenom

Pro-Lite, MilSig K-series, X7C

i dont really want to use a RT or a egrip.. i just want it to shoot when i squeeze the trigger fast..

__________________
French Canadian Division

I may have an answer to my problem. When i originally bought my 98, it came with a e-grip, which later became screwy and made my life miserable and my night filled with nightmares on what was screwing with my gun... maybe a bit melodramatic.. well, i finally became aware that the e-grip was the source of my bursting problem and replaced it by a mechanical one. Since i want to shoot faster, i could use a R/T or a e-grip but i already have one said e-grip. Sure its a dead borad, but Tippmann tech services could maybe find me another one and ship it for way less than a new one right? Well, what i got to lose trying. i've sent a email to tippmann services explaining the problem with the faulty board and asking if they could ship me another one lets -pray

__________________
French Canadian Division

you can get different boards for it that are cheaper than buying the new one.